6. FUEL SYSTEM
On Generating Sets up to 700 KVA, the baseframe design is
incorporated with an integral fuel tank with a capacity of approx.
8 hours running at Full Load. The tank is supplied complete with
fill cap breather, fuel feed and return lines to the Engine and
drain plug.
7. ALTERNATOR
7.1 INSULATION SYSTEM
• The insulation system is Class H.
• All windings are impregnated in either a triple dip
thermosetting liquid, oil and acid resisting polyester varnish or
vacuum pressure impregnated with a special polyester resin.
• Heavy coat of antitracking varnish additional protection
against moisture or condensation.
7.2 AUTOMATIC VOLTAGE REGULATOR (AVR)
The fully sealed Automatic Voltage Regulator maintains the
Voltage Regulation at ±1%. Nominal adjustment by means of a
trim pot incorporated on the AVR.
7.3 MOTOR STARTING
An overload capacity equivalent to 300% of the Full Load
impedance at zero Power Factor can be sustained for 10
seconds, when PMG option is fitted.
8. MOUNTING ARRANGEMENT
8.1 BASE FRAME
The complete Generating Set is mounted as a whole on a heavy
duty fabricated steel Baseframe.
8.2 COUPLING
The Engine and Alternator are directly coupled by means of an
SAE flange. The Engine flywheel is flexibly coupled to the
Alternator rotor.
8.3 ANTI-VIBRATION MOUNTING PADS
Anti-Vibration pads are affixed between the Engine / Alternator
feet and the Baseframe thus ensuring complete vibration
isolation of the rotating assembly.
8.4 SAFETY GUARDS
The Fan & Fan Drive along with the Battery Charging Alternator
are Safety Guard protected for personnel protection.
9. FACTORY TESTS
• The Generating set is load tested before dispatch
• All protective devices control functions and site load
conditions are simulated. The generator and it’s systems are
checked before dispatch.
10. EQUIPMENT FINISHING
All mild steel components are fully degreased and painted with
powder coated paint to ensure maximum scuff resistance and
durability.
11. DOCUMENTATIONS
Operation & Maintenance manual, Circuit wiring diagrams and
Commissioning / Fault Finding instruction leaflets are
accompanied with the Generator.
12. QUALITY STANDARDS
The equipment meets the following standards: BS4999,
BS5000, BS5514 IEC 60034, VDE0530, NEMA MG 1.22 and ISO
8528.
13. WARRANTY
All of the Generating Sets are covered under a warranty policy
for a period of 12 months. Warranty of the equipment is in line
with manufacturers warranty terms & conditions.
(check warranty statement for more details, as it may vary for different countries)
In line with continuous product development, we reserve the
right to change specifications without notice.